HANNIBAL – The following is a list of general highway maintenance work the Missouri Department of Transportation has planned in the Northeast Missouri region for the next few weeks.
All road closures and planned roadwork may be viewed on the Traveler Information Map at http://traveler.modot.org/map/.
Inclement weather may cause schedule changes in some of the planned work. There may also be moving operations throughout the region, in addition to the work mentioned below. MoDOT asks drivers to work with us by buckling up, putting your phone down, slowing down and moving over in work zones.
Adair County
Missouri Route 157 – July 22, LANE RESTRICTION for seal coat operations from Missouri Route 6 to Thousand Hills Trail near Kirksville between 8:00 a.m. and 4:00 p.m.
Route Y – July 15 & 22 - 23, CLOSED for patching operations from Missouri Route 11 to Route BB between 8:00 a.m. and 4:00 p.m. daily.
Route BB – July 16, CLOSED for seal coat operations from Missouri Route 149 to Route FF between 8:00 a.m. and 4:00 p.m.
Route HH – July 14 – 17, CLOSED for patching operations from Missouri Route 3 to Gifford Trail between 8:00 a.m. and 4:00 p.m. daily.
Route HH – July 21, CLOSED for seal coat operations from Gifford Trail to Missouri Route 3 between 8:00 a.m. and 4:00 p.m.
Lincoln County
Route M – July 14 - 17, CLOSED for asphalt pavement repairs from Missouri Route 79 to Sterling Harbor Road near Elsberry between 7:00 a.m. and 4:00 p.m. daily.
Marion County
Route J – July 14, CLOSED for seal coat operations from Route J Spur to Route D between 8:00 a.m. and 4:00 p.m.
Route Z – July 17 & 21 - 22, CLOSED for patching operations from Missouri Route 168 to Route C between 8:00 a.m. and 4:00 p.m. daily.
Route Z – July 23, CLOSED for seal coat operations from Missouri 168 to Route C between 8:00 a.m. and 4:00 p.m.
Route DD – July 15, CLOSED for patching operations from Route C to CR 195 between 8:00 a.m. and 4:00 p.m.
Route DD – July 16, CLOSED for seal coat operations from Route C to CR 195 between 8:00 a.m. and 4:00 p.m.
Route OO – July 24, CLOSED for seal coat operations from Missouri Route 168 to CR 230 between 8:00 a.m. and 4:00 p.m.
Monroe County
Route J – July 15, CLOSED for culvert replacement operations from CR 231 to CR 217 between 7:00 a.m. and 4:00 p.m.
Route N – July 16, CLOSED for culvert replacement operations from U.S. Route 24 to CR 588 between 7:00 a.m. and 4:00 p.m.
Route N – July 21, CLOSED for culvert replacement operations from CR 591 to CR 584 between 7:00 a.m. and 4:00 p.m.
Route N – July 22, CLOSED for culvert replacement operations from CR 584 to CR 595 between 7:00 a.m. and 4:00 p.m.
Route V – July 24, CLOSED for culvert replacement operations from CR 322 to CR 344 between 7:00 a.m. and 4:00 p.m.
Route HH – July 14, CLOSED for culvert replacement operations from CR 562 to CR 518 between 7:00 a.m. and 4:00 p.m.
Montgomery County
Route JJ – July 21 - 24, CLOSED for patching operations from Route F to Route E between 8:00 a.m. and 5:00 p.m. daily.
Pike County
Route F – July 23, CLOSED for patching operations from U.S. Route 61 to end of state maintenance between 8:00 a.m. and 4:00 p.m.
Route FF – July 21, CLOSED for patching operations from U.S. Route 61 to end of state maintenance between 8:00 a.m. and 4:00 p.m.
Route HH – July 24, CLOSED for patching operations from U.S. Route 61 to CR 318 between 8:00 a.m. and 4:00 p.m.
Route OO – July 22, CLOSED for patching operations from U.S. Route 61 to end of state maintenance between 8:00 a.m. and 4:00 p.m.
Route PP – July 21 – 24, LANE RESTRICTION for bridge maintenance from 0.50 mile before and after the Indian Creek bridge between 8:00 a.m. and 2:00 p.m. A 10-foot width restriction will be in place where crews are actively working.
Work with us in the work zone! Please remember to obey all work zone signs and personnel. With an increased number of highway work zones in Missouri, we urge all drivers to pay attention every second while driving, especially through a work zone. Be informed of your route by checking the MoDOT Traveler Information Map before you leave to see if you will encounter any work zones.
