The following is a listing of general highway maintenance and construction work in the mid-Missouri area for the two-week period of February 5-16, 2018. Weather conditions may postpone the work schedule. Many projects will include lane closures that could cause delays.
MoDOT reminds motorists to buckle up, slow down, follow posted signs and drive safely through work areas. For more information about a project, please contact MoDOT at 1-888-ASK-MoDOT (275-6636) or visit www.modot.org/central. You can also follow MoDOT’s Central Missouri District on Twitter and Facebook at https://twitter.com/MoDOT_Central and MoDOT Central Missouri District.
All Counties
Daylight Hours
Mowing, striping, brush cutting and guardrail repair continue in various locations. Motorists should travel with care and be alert to slow-moving equipment along the road.
Boone County
Daylight Hours
Route F over Perche Creek, south of Perche Church Road - Bridge maintenance will take place Tuesday, February 13 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Callaway County
Daylight/Overnight Hours
Route 54 Bridge Improvements:
- Route 54 over Richland Creek, west of County Road 210
- Route 54 over the Ozark Valley Railroad, west of Bluff Street
- Route 54 over Business Route 54, west of County Road 201
Traffic impacts include:
- Eastbound and westbound Route 54 traffic is reduced to one lane in each direction between Route HH and County Road 114. Route 54 traffic is head to head in the westbound lanes and separated by concrete barriers.
- Eastbound Route 54 traffic is switched to the passing lane of westbound Route 54 via temporary median crossovers, and westbound Route 54 traffic is using the driving lane of westbound Route 54.
- The Business Route 54 on-ramp to eastbound Route 54 in Fulton is closed.
- The westbound Route 54 off-ramp to Business Route 54 in Fulton is closed as are the Route 54 median crossovers at Callaway County Roads 210, 114 and 201.
All of the traffic impacts will be in place until late May.
Daylight Hours
Route D between Route 94 and Route O – Brush cutting will take place Monday, February 5 through Friday, February, 16. One lane will be open, and crews will flag traffic through the work area.
Camden County
Daylight Hours/Overnight Hours
Route 54 Outer Road over Linn Creek – Bridge replacement continues. One lane will be open through the work area. The project is scheduled for completion in late February.
Cole County
Daylight Hours
Route B between Route 54 and the Miller County line – Edge rut repair will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Route FF between Shikles Road and Spring Garden Road in Miller County – Culvert pipe replacement will take place Monday, February 5 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
Cooper County
Daylight Hours
Route 98 between Route 87 and Old Highway 98 – Brush cutting will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Route D between Route 87 and Route O in Moniteau County – Edge rut repair will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Route CC between Route 41 and Lamine Road – Pavement repair will take place Wednesday, February 7 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
Crawford County
Daylight Hours
Route 8 at Whittenburg Creek, west of Route TT – Roadside maintenance is underway. Occasional lane closures are possible in the work area. The project is scheduled for completion in May.
Route 19 between Route 8 and Route 49 – Edge rut repair will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Route 19 between Route 8 and Route O – Brush cutting will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Route 49 between Route 19 and Route Y in Iron County – Edge rut repair will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Route V between Route 49 and Route Y – Brush cutting will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Route PP between Route 19 and Bass Road – Roadside maintenance will take place Monday, February 5 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
Route UU between Interstate 44 and Argo Road – Brush cutting will take place Monday, February 5 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
Dent County
Daylight Hours
Route 19 between Route 68 and Route TT – Roadside maintenance will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Gasconade County
Daylight Hours
Route 100 between Route J and Coles Creek Road – Flood repair work will begin on Tuesday, February 6. Occasional lane closures are possible in the work area. The project is scheduled for completion in mid-March.
Route K between Route 50 and Helds Island Road – Culvert pipe replacement in various locations will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Route N between Route 100 and Route J in Osage County – Roadside maintenance will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Howard County
Daylight Hours
Route 124 between Route 240 and Route Y – Brush cutting will take place Monday, February 5 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
Route 240 between Route 40 and Route 124 – Brush cutting will take place Monday, February 5 and Tuesday, February 6. One lane will be open, and crews will flag traffic through the work area.
Route O between County Road 103 and County Road 122 – Drainage repair will take place Monday, February 5 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
Route Y between Route 124 and County Road 135 – Brush cutting will take place Wednesday, February 7 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Route Z over Bartlett Creek, east of County Road 341 - Bridge maintenance will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Laclede County
Daylight Hours
Route 5 between Sixth Street and Vance Street – Sidewalk and signal improvements continue. Occasional lane closures are possible through the work area.
Route 32 between Route Z and Universal Drive – Culvert pipe replacement will take place Monday, February 5 through Friday, February 9. The road will be closed from 8 a.m. until 3 p.m. each day. Motorists are advised to seek an alternate route around the work area.
Maries County
Daylight Hours
Route 63 over the Gasconade River, north of Route A – Flood repair work is underway. Occasional lane closures are possible in the work area. The project is scheduled for completion in early March.
Route JJ between Route T and County Road 205 – Tree limb removal will take place Monday, February 5 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
Miller County
Daylight Hours
Route 42 between Route 17 and Route A – Culvert pipe replacement will take place Monday, February 5 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
Route 42 between Route A and Mace Lane –Brush cutting will take place Monday, February 5 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
Route FF between Spring Garden Road and Shikles Road in Cole County – Culvert pipe replacement will take place Monday, February 5 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
Moniteau County
Daylight Hours
Route D between Route O and Route 87 in Cooper County – Edge rut repair will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Route E between Route 50 and Smith Creek Road – Brush cutting will take place Monday, February 5 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
Route Y between Route 179 and Garrett Road – Tree cutting will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Morgan County
Daylight Hours
Route FF between Route 52 and Beechnut Road – Tree trimming will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Osage County
Daylight Hours
Route 89 at the Gasconade River, east of Route E – Flood repair work continues. Occasional lane closures are possible in the work area. The project is scheduled for completion in late February.
Route A between Route 50 and Route W – Culvert pipe replacement will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Route N between Route J and Route 100 in Gasconade County – Roadside maintenance will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Route T between Route 63 and Route AA – Brush cutting will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Phelps County
Daylight Hours
Route E between Route A and the end of state maintenance in Maries County – Brush cutting will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Pulaski County
Daylight Hours
Route 28 between Interstate 44 and Route C – Roadside maintenance will take place Monday, February 5 through Friday, February 16. One lane will be open, and crews will flag traffic through the work area.
Washington County
Daylight Hours
Route E between Route 47 and Route CC – Brush cutting will take place Monday, February 5 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
Route CC between Route E and Cole road in St. Francois County – Roadside maintenance will take place Monday, February 5 through Friday, February 9. One lane will be open, and crews will flag traffic through the work area.
MoDOT encourages motorists to log on to www.modot.org/central to comment on their experiences traveling through highway work zones.
###